Why Arlington's Brick Ranch Windows Need Custom-Built Wood Shutters

What Breaks When You Try to Fit Standard Shutters to 1960s Openings

Most wood shutters sold in showrooms are manufactured to standard window sizes, and installers arrive expecting your frame to match those dimensions. In Arlington's brick ranch and split-level homes from the 1960s through 1980s, that assumption fails more often than it holds. Older windows were framed by crews who built to the rough opening rather than a catalog spec, so the width at the top of the frame might differ from the width at the sill by a quarter inch, and the corners aren't always square. When you mount a standard shutter in a frame like that, one edge binds while the other leaves a gap, the louvers don't tilt evenly, and light leaks around the perimeter.

Custom-built wood shutters are cut to the measurements of your window as it is, not as a standard assumes it should be. The owner measures the width at multiple points, checks the depth of the frame, and records the out-of-square dimension before the shutter is made. When it arrives, it fits the opening without gaps, the louvers tilt smoothly across the full panel, and the frame sits flush against the trim. You see clean lines and even light control, and the shutter operates the way it should because it was made for your window.

How Simply Shades Measures and Installs Custom Shutters in Arlington

Simply Shades schedules a free in-home consultation where the owner visits your home, measures each opening himself, and checks for out-of-square frames before cutting. In Arlington neighborhoods near Lake Arlington and the Entertainment District, many homes have long west and south-facing windows that were never fitted for modern window coverings, and newer subdivisions on the city's outer edges are built with wider openings and larger glass that call for precise measurement. The owner records the width at the top, middle, and bottom of the opening, confirms the sill depth, and checks the mounting surface so the brackets hit solid framing rather than drywall alone.

Once the measurements are confirmed, the shutters are built to those dimensions in Texas and delivered to your home. The same team that measured installs them, adjusting the hinges and testing the louver tilt before they leave. Because the shutters are made to your exact measurements at the factory, you skip the showroom markup and get a fit built for your windows, not a one-size-fits-most panel forced into place.

If you need custom wood shutters measured and installed in Arlington without retail overhead, contact us to schedule your in-home consultation.

What to Check Before Ordering Shutters for Older Arlington Homes

Not every window in a 1960s or 70s Arlington home is suited for shutters without modification, and measuring before ordering helps you avoid problems that can't be fixed once the panels are built.

  • Frame depth determines whether the shutter mounts inside the opening or on the wall outside it—older sills are often too shallow for an inside mount, so the shutter needs to be built as an outside mount with a deeper frame
  • Out-of-square openings need to be measured at multiple points so the shutter panel is cut to the widest or tallest dimension, then shimmed during installation to sit square in the frame
  • Wide windows in open-plan living areas near Arlington Highlands may require a center divider so the louvers tilt evenly across both panels—single-panel shutters wider than 36 inches often sag or bind over time
  • West-facing windows that catch afternoon sun need louvers wide enough to block light completely when closed, while east-facing windows can use narrower louvers that tilt to soften morning glare without full blackout
  • Original plaster walls in older Arlington brick ranches require longer screws and careful bracket placement to hit the wood framing behind the plaster, or the shutter pulls loose under its own weight

The owner checks all of these factors during the in-home consultation, before the shutters are ordered. Custom measurement solves most issues before fabrication, so the finished panels fit the openings you have rather than the openings the factory assumes. Ready to measure your Arlington windows for custom wood shutters? Get in touch to bring the samples to your home and check the frames yourself.